Alpine MRV-F340

MRV-F340 Alpine MRV-F340
4/3/2 Channel Power Amplifier
SEE OUR ALPINE PAGE HERE FOR PRICE AND AVAILABILITY
Key Features  
• Max Power (EIAJ) 140Wx2 (4ohm; Stereo) 400Wx1 (Bridged 4ohm;)
• 12V RMS Continuous Power 4ohm; Stereo (0.08% THD) 40Wx2 2ohm; Stereo (0.3% THD) 75x2 Bridged 4ohm; (0.3% THD) 150x1
•14.4V RMS Continuous Power 4ohm; Stereo (0.08% THD) 60Wx2 2ohm; Stereo (0.3% THD) 100x2 Bridged 4ohm; (0.3% THD) 200x1
• Bass Engineฎ
• S/N Ratio 100dBA
• Frequency Response: 10-50kHz
• 12dB HP/LP Crossover
(50-200Hz)
• Speaker Level Input
• Subsonic Filter (15Hz)
• Extra Large Gold Plated Terminals with Wire Insert Capability
• Top Panel Power LED
• 4 Volt Input Capability
• Continuously Adjustable Crossovers
• DC Straight, STAR Topology
• DC-DC/PWM MOSFET Power Supply
 
Road tested and time proven, V12 amplifiers with their "no shut down" design keep playing when you need them the most. The Audio Quality MOSFETS restore power and produce killer, tight crisp bass.
 
Owner's Manual
 Download owners Manual
  
Features:

    General-Amplifiers

  • 5/4/3 Channel Operation
  • Adjustable Crossover (HP/LP)
  • Auto Overcurrent Protection
  • Bass EQ Circuit
  • Bass Engineฎ
  • DC Straight Design
  • DC-DC PWM Power Supply
  • Discrete Pre-Amp Stage
  • Gold Plated RCA Input Connectors
  • Input Mode Selector Switch
  • Integrated Wire and Mounting Screw Terminals
  • MOSFET Final Outputs
  • MOSFET Power Supply
  • MultiMode
  • Noise Elimination Coil
  • One side Terminal Layout
  • Phase Selector
  • STAR Circuitry
  • Solid Copper Bus Bars
  • Subsonic Filter
  • Top Mounted Blue LED Power/Status Indicator
Specs:

    General-Amplifiers

  • Dividing Network : 30Hz-200Hz HP/LP (12dB/oct)
  • Foot Print (WxHxD)in : 11-13/16” x 2-3/8” x 16-1/2”
  • Foot Print (WxHxD)mm : 300mm x 60mm x 420mm
  • Frequency Reponse : 10Hz-50kHz (+0,-1dB)
  • Heat Sink (WxHxD)in : 9-7/8” x 2-3/8” x 16-1/2”
  • Heat Sink (WxHxD)mm : 250mm x 60mm x 420mm
  • Input Impedance : 10k ohm
  • Input Sensitivity (for rated power) : 0.2 V to 4.0V
  • Power Requirements : 14.4V DC (11V to 16V)
  • Signal to Noise (S/N) : 100dBA (referenced to rated power)
  • Slew Factor : greater than 5
  • Speaker Impedance : 4 or 2 ohms(stereo), 4 ohms(bridged)
  • Weight : 6.2kg(13lbs. 11oz.)

    MAX Power (at 14.4V,EIAJ)

  • Bridged 4 ohms : 240W x 2 + 370W x 1
  • Per channel into 4 ohms : 90W x 4 + 370W x 1

    RMS Power (at 12V,20Hz-200Hz)

  • Bridged 4 ohms : 80W x 2 + 150W x 1
  • Per channel into 2 ohms : 40W x 4 + 150W x 1
  • Per channel into 4 ohms : 30W x 4 + 150W x 1

    RMS Power (at 14.4V,20Hz-200Hz)

  • Bridged 4 ohms : 120W x 2 + 200W x 1
  • Per channel into 2 ohms : 60W x 4 + 200W x 1
  • Per channel into 4 ohms : 50W x 4 + 200W x 1